DMZ-8E Flow Volume Counter
The DMZ-8E Flow Volume Counter is used for dosing or filling preset fluid volumes with two limiting values.
This unit also captures the flow rate and can therefore be used as an adjustable flow monitor. A freely configurable current output can be assigned either to the volume or to the speed.
Commercially available a flow sensors, which emit pulses proportional to the volume, are used as signal generators.
These could be contact-equipped water meters or impeller wheel recorders, for example.
Multiple configuration and setting options enable the user to adjust the unit precisely to the given application.
Back to overview
Technical Data |
|
|---|---|
| Power supply | 230 V AC +5%/-10%, 50 Hz |
| Power consumption | approx. 15 VA |
| Fuse protection | 4 A mT |
| Inputs | 10 V DC, I approx. 9 mA contact resistance: max. 1.5 kOhm |
| Relay outputs | 5 x neutral, max. 230 V AC, 2 A |
| Current output | 0(4)...20 mA, max. load 400 Ohm linearity: 0.5% FS |
| Transmitter | water meter with neutral contact or NPN open collector or vane-type sensor with NPN open collector |
| Transmitter factor | 0.01 ... 9999 pulses / liter |
| max. transmitter frequency | 500 Hz (adjustable) programmable contact de-bouncing via maximum sender frequency |
| Climatic Conditions | acc. to DIN EN 60204-1 ( 05-2010 ) |
| Ambient Temperature | operation: -20 ... +55 °C transport/storage: -25 ... +55 °C |
| Housing | control panel housing per DIN 43700 with transparent cover up to IP65 in front of the control panel |
| Dimensions | W / H / D : 144 x 72 x 116.6 mm |
| Framing dimensions | W / H : 137 x 67 mm |
| Download PDF |  Data Sheet |
 Description |
|
| Ordering information | DMZ-8E: E1720 |